Protect your investment!

This kit contains everything you need to ceramic coat your car at home.

Ceramic coating your car is the perfect way to prolong it's appearance both short term and long term.

Short term, the hydrophobic lotus-effect and slickness help water droplets carrying dirt bead off before drying out and depositing minerals or dust particles. When it is time to wash, you'll notice how much easier cleaning is thanks to the non-stick surface.

Long term, the UV inhibitors and extra layer of hardness will protect your camper's paint, gel-coat and any vynil decals from all kinds of weather damage.

No more fading or staining!

Protects against:

•  Scratches and Scuffs
•  UV and Oxidation Damage
•  Acid Rain
•  Fouling and Staining

Extra Benefits:

•  Wet-Look Gloss
•  Hydrophobic Self-Cleaning Lotus-Effect
•  Maximum Smoothness

Directions:

1. Wash your car thoroughly. Ensure that all dirt, dust and staining is removed. We recommend using QP-ON car Pre-Wash Cleanser, QP-ON car pH neutral shampoo and if needed polishing the car with a machine and polishing compound. It is important to use a shampoo without coating additives, e.g. a ceramic shampoo as this will create a barrier between the coating and the substrate.
   
   
2. Use the included de-greaser. Spray on, allow it to haze and wipe off with a clean microfiber towel.
   
3. Ideally, do not coat your car in direct sunlight. Indoors is the optimal setting, but shade is also fine.
   
   
4. Apply a few drops of coating with the included pipette onto your applicator. Apply the coating in a cross-wise motion, starting at the top. Work panel by panel to ensure coverage.
   
   
5. Allow to dry for 4-6 hours before driving. The coating is fully cured in 12 hours. 2 hours under an IR lamp.

Maintenance

• The coating is generally maintenance-free and will last at least 2 years.
• Any scratches or hazing can be polished out with our ceramic polish by hand if they're small, or with polishing compound and a machine for deeper scratches.
• To boost gloss and the hydrophobic lotus-effect, wash with QP-ON Ceramic Shampoo.

Coverage

our 100ml kit contains enough coating to cover 80m² in a single layer.
this means roughly any car or bus at or under these dimensions:

Length: 7.5m

Width: 2.4m

Height: 3.1m

For normal cars and vans, our 50ml kit will cover up to 40m² in a single layer.

That roughly translates to a vehicle at or under these dimensions:

Length: 5.0m

Width: 1.9m

height: 2.1m

Please note; these are a rough guide and we recommend measuring your vehicle to determine surface area coverage. We have sized our bottles to be large enough for 90% of our customers, however do double-check surface area if you have a particularly large car or van.